PCE CT-40 Coating Thickness Gauge

Jakarta 4 Februari 2016

Detail

Tangggal iklan:

Kota: jakarta

Merk: PCE

Tipe: CT40

Kondisi: Baru

Penjual

Subarkah

Nama: Subarkah

Terdaftar sejak: 10 Oktober 2012

Status: Subarkah

Facebook: darmatek1

No Telpon: 021--XXXX-XXXX

No Handphone: 0812-XXXX-XXXX

Coating Thickness Gauge for measuring coatings on steel

The PCE-CT 40 coating thickness gauge measures coating thickness on steel and non-ferrous metals without damaging the surface. The menu and adjustment for new parameters convert the PCE-CT 40 coating thickness gauge into an indispensable device for testing during production, in workshops and in quality control. The ergonomical form of the coating thickness meter and its integrated sensor make it easy to use allowing for quick and accurate readings. It has been designed for measuring non-magnetic coatings such as lacquer, plastic, copper, chrome, zinc and enamel on steel and iron, as well as insulating coatings such as lacquer, plastic, enamel, paper, glass and rubber on copper, aluminium, brass, stainless steel and anodised aluminium.

- Instant measurement without the need to calibrate before hand

- Wide measurement range from 0 to 5.0mm

- Highly accurate

- Can take continuous measurements

- Measurements are not influenced by vibrations

- Resistant to wear

- The " V" slot simplifies measurements on curved surfaces such as axles

- Optical alarm for measurements on unknown base materials

- Comfortable to use in only one hand

- Selectable units of measurement of either µ m or mm

- Turn on and off wither automatically or manually

- Contents include coating thickness meter with battery, carrying case with calibration standard and

user' s manual

The coating thickness gauge is used, above all, in the automotive industry. Who has bought a car that is supposedly never been in an accident, to later discover an area that has sustained major damage? It is not necessary to be an expert in materials, but it would be helpful to have the ability to determine if a car has been damaged and then repaired. The PCE-CT 40 coating thickness gauge is the solution for easily determining the condition of body work on a car. Simple select the type of base material, either steel or aluminium, place the device on the area that you wish to measure and the reading will tell you if the coating of paint is uniform and to the correct thickness as applied originally by the manufacturer. In cases where body filler has been used, the coating on the metal will be more than one millimeter. The PCE-CT 40 coating thickness gauge hs a range of 0 to 5000 µ m ( 5.0mm) . In cases where abnormal thickness are determined, it would be time to question the condition of the car and be more cautious.

The coating thickness gauge can also be used in whichever industry where there is the need to measure the thickness of coatings on ferrous or non-ferrous materials. An example of this is galvanizing. To ensure that the coating thickness gauge is showing the correct reading, there is a calibration standard included with the device. An optional ISO calibration can be ordered to ensure readings meet ISO standards. The certificate includes the measurement values and the serial number of the device. There is also a testing plate that will help determine when a recalibration is required.

Technical specifications

Measurement range

0 to 5000 µ m respectively

0 to 200 mils ( selectable)

Measurement values

from 0.0 to 999 µ m

from 1.00 to 5.00mm

Measuring on

only ferrous

Resolution

0.1 µ m in the range 0.0 to 99.9 µ m

1 µ m in the range 100 to 999 µ m

0.01 mm in the range 1.00 to 5.00 mm

respectively

0.01 mils in the range 0.00 to 9.99 mils

0.1 mils in the range 10.0 to 99.0 mils

1.0 in the range 100 to 200 mils

Accuracy of repeat measurements

± ( 1µ m + 2% ) of 0 to 999 µ m

± 3.5% of 1001 to 5000 µ m

Minimum area of measurement

10 x 10mm

Minimal radial curvature

convexed: 5 mm; concaved: 30mm

Minimum base material thickness

type F: 0.2mm

type N: 0.05mm

Display

LCD with 4 digits

Operating temperature

0 to 60° C

Power

9V battery ( included)

Dimensions

118 x 58 x 38mm

Weight

150g with battery

Delivery Contents:

1 x PCE-CT 40 Coating Thickness Gauge with integrated sensor, 1 x carrying case with calibration standard, 1 x battery, 1 x user' s manual

=================================

Untuk Informasi dan Pemesanan Hubungi :

DARMATEK

Contact Person : Subarkah

Telpon : 021-91872977

H P : 0812 838 04273 / 0857 740 67221

WA : 081932632003

Email : subarkah18@ yahoo.co.id

Gmail : darmatek1@ gmail.com

Y M : cs_ darmatek

Pin BB : 7512cbb7

Web : http: / / www.darmatek.com

Link : http: / / darmatek.indonetwork.co.id,

http: / / darmatek01.blogspot.com

Belum ada komentar

Tulis komentar

Scroll